Corporate & IT Interview Preparation

Q.11 Medium OSI Model

A packet arrives at a router with a damaged frame header. At which OSI layer should this be detected?

A Physical Layer

B Data Link Layer

C Network Layer

D Transport Layer

Correct Answer: B. Data Link Layer

Explanation:

The Data Link Layer (Layer 2) uses CRC (Cyclic Redundancy Check) to detect frame errors and corruption in the frame header.

Take Test

Q.12 Medium OSI Model

Which of the following scenarios requires Layer 7 (Application Layer) involvement?

A Converting binary data to decimal format

B Establishing a secure HTTPS connection to a website

C Assigning IP addresses to devices

D Creating physical connections using Ethernet cables

Correct Answer: B. Establishing a secure HTTPS connection to a website

Explanation:

HTTPS (web browsing) is an Application Layer protocol. A, C, and D belong to Presentation, Network, and Physical layers respectively.

Take Test

Q.13 Hard OSI Model

In a network troubleshooting scenario, ping command works but HTTP requests fail. Which OSI layer likely has the issue?

A Physical Layer

B Data Link Layer

C Network Layer and above

D Application Layer or above

Correct Answer: D. Application Layer or above

Explanation:

Since ping (Layer 3) works, Layers 1-3 are functional. HTTP failure indicates an issue at Layer 7 (Application) or Layer 6 (Presentation).

Take Test

Q.14 Hard OSI Model

Which OSI layer concept is MOST relevant when implementing Quality of Service (QoS) in modern networks?

A Layer 1 (Physical Layer)

B Layer 2 (Data Link Layer)

C Layer 3-4 (Network and Transport Layers)

D Layer 7 (Application Layer)

Correct Answer: C. Layer 3-4 (Network and Transport Layers)

Explanation:

QoS mechanisms like traffic prioritization, bandwidth allocation, and packet classification operate at Layers 3 and 4 using IP and TCP/UDP information.

Take Test

Q.15 Hard OSI Model

A VPN (Virtual Private Network) operates across multiple OSI layers. Which layer is MOST critical for VPN encryption?

A Layer 2 (Data Link)

B Layer 3 (Network)

C Layer 4 (Transport)

D Layer 6 (Presentation)

Correct Answer: D. Layer 6 (Presentation)

Explanation:

VPN encryption primarily occurs at Layer 6 (Presentation Layer) for data encryption, though some VPN protocols like IPSec operate at Layer 3.

Take Test

Q.16 Hard OSI Model

In the context of the OSI model, what is the relationship between PDUs (Protocol Data Units) at different layers?

A All PDUs are identical regardless of layer

B Each layer adds its own header, creating data encapsulation

C PDUs only exist at odd-numbered layers

D PDUs are only relevant at the Transport Layer

Correct Answer: B. Each layer adds its own header, creating data encapsulation

Explanation:

Each OSI layer adds its own header (and trailer) to data, creating PDUs with different names: Segment (L4), Packet (L3), Frame (L2), Bits (L1).

Take Test

Q.17 Hard OSI Model

A network administrator observes that devices on the same switch can communicate, but cross-switch communication fails. Which layer's configuration is most likely faulty?

A Layer 1 (Physical Layer)

B Layer 2 (Data Link Layer)

C Layer 3 (Network Layer)

D Layer 4 (Transport Layer)

Correct Answer: C. Layer 3 (Network Layer)

Explanation:

If intra-switch communication works but inter-switch fails, Layer 2 is functional. The issue is at Layer 3 (routing/IP configuration) for cross-network communication.

Take Test

Q.18 Hard OSI Model

Which statement BEST describes the difference between connection-oriented and connectionless communication in the OSI model?

A Connection-oriented uses Layer 1, connectionless uses Layer 7

B TCP (Layer 4) is connection-oriented; UDP (Layer 4) is connectionless

C This distinction only applies to Layer 2 protocols

D All Application Layer protocols are connection-oriented

Correct Answer: B. TCP (Layer 4) is connection-oriented; UDP (Layer 4) is connectionless

Explanation:

TCP establishes a connection before data transfer (handshake), while UDP sends data without pre-established connection. Both are Layer 4 protocols.

Take Test

Q.19 Hard OSI Model

For a real-time video conferencing application, which OSI layer protocol should be prioritized and why?

A Layer 2 (Ethernet) for speed

B Layer 4 (UDP) for low-latency, real-time delivery

C Layer 5 (Session protocols) for dialog management

D Layer 7 (HTTP) for content delivery

Correct Answer: B. Layer 4 (UDP) for low-latency, real-time delivery

Explanation:

Real-time applications like video conferencing use UDP (Layer 4) instead of TCP because UDP has lower latency despite no guaranteed delivery, which is acceptable for video streams.

Take Test

Q.20 Easy OSI Model

Which of the following layers of the OSI model is responsible for converting data into signals suitable for transmission over a physical medium?

A Physical Layer

B Data Link Layer

C Network Layer

D Transport Layer

Correct Answer: A. Physical Layer

Explanation:

The Physical Layer (Layer 1) handles the conversion of data into electrical signals, light pulses, or radio waves for transmission over physical media.

Take Test

All Subjects & Topics